Statement/Invoice Profiles must be set up before Statements or Invoices can be batched.

• If the Statement Profile is selected as the Default, it will be attached to new Patients automatically.
• Other Statement/Invoice Profiles can be created to be used for attachment in the Patient Demographics and on the Modify Encounter screen.

• If a Statement Profile is selected in the Patient Demographics or on the Modify Encounter screen, the Default Profile is overridden.

• A Statement/Invoice Batch must be sent to the Statement Department.

• Proofs will be sent to you to approve.

• Statement/Invoice Test Batch and Proof

Statement/Invoice Setup Workflow

1. Set up Statement/Invoice Profiles.
2. Assign the Statement/Invoice Profiles to Patients/Encounters.
3. Create a Test Batch for Statements and Invoices (separately if using both).
4. Upload to Statement Department.
5. Proofs will be sent back to you for both (if using both).
6. Approve Proof(s).
7. Send separate Proofs to the Statement Department for Statements and/or Invoices.
8. Approve the Proofs.

Set Up a Statement/Invoice Profile

• Admin on the Left Side Menu > Statement Profiles

• Select Add.

Statement Info Panel

1. Description: This field is for internal use (not patient facing).
2. One Statement Per: Select Guarantor or Patient. 

• This setting determines Patient billing or Family billing and dictates which Account Number appears on the Statement.

• Guarantor: One statement per Guarantor (Family billing)

• Uses the Guarantor ID as the Account Number on the Statement.

• Patient: One statement per Patient (Patient billing)

• Uses the Patient ID as the Account Number on the Statement.

3. Default: Select this option to make this Statement Profile the default selection for all new Patients.
4. Default Invoice: Choose this as the Default if this Statement Profile is for billable Employers. When an Employer is setup in the Library, the Statement field will default to this Profile. The System will create automatically an Invoice instead of a Statement.
5. Account Type Identifier: When this option is selected, the statement account number is prefixed with the letter "P" or "G". (This setting does not apply to locally printed Statements or to Invoices.)

• P: For Patient Billing Statements - the account number is the Patient account number.
• G: For Family Billing Statements (and all custom statement types) - the account number is the Guarantor account number.

6. Number of Statements/Invoices that should display transaction detail:

For Statements

• To limit the number of Statement pages sent, choose a low number, such as 1 or 2.

• The Statements exceeding this setting will display a Balance Forward Line instead of the Transaction Details from previous Statements.
• Use System Setting: EXCLBALFW to exclude Balance Forward in the Statement Total.

• For Transaction details to appear on every Statement for Balances Due, select All.

For Invoices

• Select 1 for Invoice Billing.

• If Number of Invoices to Display Transaction Details is set to 1, and If the Max Dunning Count is set to more than 1, the Balance Forward lines are separated into a line for each previous Invoice with a Balance Due.

• Displays the Invoice ID# with the Charge and Payment Amounts as the Product Description on the Balance Forward line(s).

• If the Max Dunning Count is set to 1, no Balance Forward lines will show on the Invoices.

7. Hold Statements: Select this option if this Statement Profile will be used to Hold (Prevent) a balance from billing on a statement.

• A Statement Profile can be assigned at the Patient/Encounter/Provider levels. Balances can be Held at these levels by assigning a Statement Profile with the Hold Statements option selected.

8. Cycle Days: This determines the number of days between Statements sent to a Guarantor with this Profile, and allows you to generate Statements daily without the Guarantor receiving two Statements in the same month.
9. POPS Link: *This is a Premium Add-On feature. A link or QR Code can be added to the paper Statements that directs the Guarantor to a website to pay on the account.

• None
• Link
• QR Code
• Link and QR Code

10. POPS Group: Select the Group to provide a POPS/QuickPay link on the paper Statement with the option chosen on the PatientOps Link field.

Billing Office Info Panel

The only fields that show on locally-printed Statements are Hours Line 1, Phone, and Email.

• Hours Line 1 and 2: The time of day for patients to call regarding billing (not necessarily your office hours).
• Phone: The phone number for calls regarding billing.
• Fax: The fax number for billing.
• Email: The email for billing (if applicable).

• Return Address: This is the return address for your Practice. The Patient Ledger Report also uses this information to print the Practice name and address on the report.
• Remit Address: This is the address where the patient will remit the Payment. If this is the same as the Return Address, select the Copy Return Info checkbox.

• The first line of this Address is pulled to the Make Check Payable To field on the Statement.

Contact Info on Statement Panel

• Contact Info on Statement: Control the billing office contact information that prints in the lower-right corner of the Statement. Note that this information will not appear on locally-printed Statements.
• Select your options from the drop-down: The output that shows on the Statement pulls from the matching field.
• Free Text: Type exactly what you want to print, and choose the alignment and format.

Dunning Count and Notifications Panel

• No Dunning Limit: Select this checkbox to continue sending Statements for Patient balances without stopping.

• If you have set up Dunning Messages, the last Dunning Message will display on Statements that exceed the number of Dunning Messages set up.
• Example: You chose the option for No Dunning Limit, and three Dunning Messages have been set up. You have already sent three Statements and are now sending the fourth. The third Dunning Message will be sent on the fourth Statement and all subsequent Statements.

• Clear Pre-Collections: This is selected by default and only works if you have not selected the No Dunning Limit option.

• When the Statements are batched, the previous Pre-Collections list will be cleared. If you do not want it cleared, do not select this checkbox.

Payment Rules Panel

• Amount: This applies to auto-posting patient payments. Enter the minimum acceptable payment amount or percentage of outstanding balance. If the patient payment is auto-posted and meets the Payment Rules, the Dunning Message Level will auto-reset to what it was prior to the statement being sent. This field can be left blank.
• Dunning Reset: When a payment is posted that satisfies the Payment Rules (but does not settle the entire balance)

• Reset to Zero sets the Dunning Count to Zero (treated as a current balance).
• Minus One sets the Dunning Count to the count it was when the last statement was batched.
• Self-Pay Discount: Percentage to discount if a patient is self-pay.
• Adjustment Code: Transaction Code to use for the discount.

• First Statement Only: Apply the discount to the first Statement only.

Invoice Options Panel

Use this panel to customize your own Invoices. For this panel to be available, System Settings must be activated. 

• If you are outsourcing the printing/mailing of your Invoices, this panel will not display. Only use Admin > System Settings > General < Yes
• If you are in-sourcing the printing/mailing of your Invoices, you will need to activate two Invoice settings in System Settings.

• Admin > System Settings > General > Invoice > Yes;  The setting activates invoicing features, such as creating Invoice Batches and Posting Invoice Payments.
• Admin > System Settings > Invoice > USENEWINVOICE > Yes. This setting allows you to use the System Invoice and activates the Invoice Options panel on the Statement/Invoice Profile.

Customize the System Invoice

• Current Logo: If a logo already exists, select the View link to see it.
• Upload Logo: Your company's logo can be uploaded to appear on your Invoices.

• Note: The logo should not be uploaded with a border.

• Credit Card Box: Select Yes for the Credit Card section to appear on the Invoices.
• Show Labels: Select Yes to show the Labels on the Invoice for the selected Credit Cards that are accepted.
• Visa, MasterCard, Discover, American Express: Select Yes for the credit cards that are accepted.
• Show Last Payment: Select Yes to display the Last Payment on the Invoice.
• Repeat Patient Name
• Address Font Size: Select the Font size to use for the Address.
• Details Font Size: Select Font size the Invoice Details.
• Highlight Color: Select a Highlight Color to use.
• Remit Payment Label: Enter a Remit message

• Example: Please make checks payable to: The Clinic

Invoice Details: Total by Patient or Procedure

• Total By: Select Patient or Procedure.

• Patient: Organize the Invoice by Patient.
• Procedure: Organize the Invoice by a summation of the rendered services (Procedures).

1. Font Size: Select the desired Font Size.
   
2. Diagnosis Code: Determines if a Diagnosis Code column is printed on the Invoice.
   

                  

Note Panel

For Internal uses only and does not print on the Statements.

Select Save [F2].

Assign First Statement Profile to Patients and Encounters

When the first Statement Profile is setup and marked as Default it can be assigned to all existing Patients and Encounters.

• After saving, select the Assign this Statement Profile to existing Patients and Encounters checkbox on the Validation Warning.

Statement and Invoice Test Batch and Proof

Before your Statement/Invoice Go-Live, Statement and Invoice Test Batches must be created and uploaded to the Statement Department.

• If you are using both Statements and Invoices, a test batch for each must be sent to the Statement Department.

• Proofs for Statements and Invoices will be sent back to you for your approval.

• If you are using only Statements or only Invoices, you will receive one proof for the one you are using.
• If you are using both, you will receive Proofs for Statements and Invoices.

• Select this link for more information: Statement/Invoice Test Batch and Proof.

Difference between the Statement Count and Dunning Message Count

• Statement Count: The physical number of Statements that have been sent to the Guarantor to collect a balance.
• Dunning Message Count: Represents the current Dunning Level. This determines the dunning message printed on the Statements, and drives the letters and Pre-Collections processes.

Hold Statements until All Line Items are Paid on an Encounter

• System Setting: HASINSBAL

Learn More

Statement Proof Confirmation

Statement Samples

Statement System Settings